How to Set Up CS2 for Competitive Play: Settings Checklist
How to set up CS2 for competitive play: video, sensitivity and eDPI, crosshair, audio, radar, network and binds, with pro usage data as a reference.
Quick answer
Set up CS2 in this order: video, sensitivity, crosshair, audio, radar, network, then binds. Pro data from ProSettings.net shows a median eDPI of 830 and 1280x960 as the most-used resolution, but these are references, not rules.
- Median pro eDPI is 830; most pros use 400 DPI (66%) or 800 DPI (28%).
- 1280x960 is the most-used pro resolution (53%), but beginners should start with native.
- Use fullscreen, disable V-Sync and aim for at least 144 Hz, ideally 240 Hz or more.
- Valve changed crosshair settings in September 2026, so check the patch notes.
To set up CS2 for competitive play, work through the options in order: video, sensitivity, crosshair, audio, radar, network and binds. The numbers below come from ProSettings.net’s CS2 guide, which uses data from professional players as of November 2026. They are a reference for what pros do, not a mandate, and they are one outlet’s recommendations.
1. Video
Resolution and display
The most-used pro resolution is 1280x960 (53%), followed by 1024x768 (15%), 1920x1080 (13%), 1280x1024 (6%) and 1152x864 (5%). The vast majority of pros play stretched. ProSettings.net notes two reasons pros give: a stretched resolution makes character models look wider and, in the guide’s words, easier to hit, and lower resolutions raise frame rate because there are fewer pixels to render. For beginners the guide recommends your monitor’s native resolution and aspect ratio, and lowering the resolution only if you are short on frames.
Use fullscreen mode, set the refresh rate to your monitor’s native value and make sure it is also enabled in Windows display settings. You need at least 144 Hz to be even a little competitive, the guide says, and it recommends at least 240 Hz if you are serious, noting that the competitive standard has moved towards 360 Hz with diminishing returns above that.
Graphics options the guide recommends
| Setting | Recommended value | Reason given |
|---|---|---|
| Boost Player Contrast | Enabled | Player models stand out more |
| Wait for Vertical Sync | Disabled | V-Sync can add input lag |
| Anti-aliasing | CMAA2 | Little performance cost, avoids a jagged look |
| Global Shadow Quality | Low | Frame rate boost, as long as Dynamic Shadows is set correctly |
| Dynamic Shadows | All | “Sun Only” puts you at a disadvantage in candle and man-made light areas |
| Model/Texture Detail | Medium | Low can blur blood splatters |
| Texture Filtering | Anisotropic 4x | Some users report lag with bilinear or trilinear |
| Shader Detail | Low | Eye-candy only |
| Particle Detail | Low | Makes it easier to see through smokes and particles |
| Ambient Occlusion | Disabled | Large performance hit and no competitive value |
| High Dynamic Range | Quality | Performance mode adds a grainy filter |
| FidelityFX Super Resolution | Disabled | Looks blurry and grainy |
| NVIDIA Reflex Low Latency | Enabled | Reduces system latency |
If you have frames to spare, Reflex “enabled + boost” can cut latency further at some cost in frames. Add -high to the launch options in Steam to start the game with high process priority, keep your drivers up to date, and disable animated avatars under Settings, Communication, Game if you find them distracting.
2. Mouse and sensitivity
- Median pro eDPI: 830 (DPI multiplied by in-game sensitivity).
- Most-used DPI: 400 (66%), 800 (28%), 1600 (5%). Most pros use 3200 DPI or lower.
- Polling rate: 1000 Hz, or up to 4000 Hz on mice that support it.
- Transfer: sensitivity moves 1:1 from CS:GO to CS2.
- Zoom sensitivity multiplier: the default of 1 is common and recommended, which also matters when you pick up an AWP on an eco round.
The guide explains why lower sensitivity is more forgiving with an area argument: if you think of an enemy’s head as a circle, halving your sensitivity doubles its radius on your mousepad, so the target area grows by a factor of four. A very high eDPI is the most common handicap. The guide also lists a fun fact, that the average pro moves the mouse about 47 cm for a 360-degree turn.
Start near the median and adjust over a week. Changing sensitivity daily stops muscle memory from forming. The general approach to aim practice in how to improve aim on mobile works the same way on PC: use a fixed routine and measure progress.
3. Crosshair
The default crosshair is a lot more usable than the one in CS:GO, and the guide says there is nothing wrong with keeping it. Whatever you pick, it has to be visible on all backgrounds. CS2 also has a Follow Recoil option: the crosshair follows the weapon’s recoil pattern, which acts as a built-in trainer for new players or players learning a weapon. Valve changed the crosshair settings in September 2026, so check Valve’s patch notes before importing a code from older sources. We do not publish individual pro crosshair codes.
The guide also recommends turning first-person tracers off, because they do not always align with where your bullets go and can mess up your sprays. This option is under Settings, Game, Item.
4. Audio
You can win many duels with the right audio, the guide says, so turn off all virtual surround processing and prioritise game volume over chat and music.
| Setting | Recommended value |
|---|---|
| EQ profile | Crisp (or Natural if Crisp is too harsh) |
| Round start, round action, round end volume | 0% |
| MVP and bomb or hostage volume | 0% |
| Death camera volume | 0% |
| Ten second warning volume | 0 to 20% |
| Mute MVP music when players on both teams are alive | Enabled |
| Voice | Press to use mic, VOIP volume 100% |
Valve added a specific bomb beep for the last ten seconds in October 2023, so the old ten-second warning is no longer required. L/R isolation and perspective correction depend on preference: the guide says a CS:GO-style experience uses 100% isolation and no perspective correction, while the newer, more blended sound system can be worse for competitive performance for some players. Avoid playing music while competing.
5. Radar
The guide recommends zooming the radar out and possibly making it larger, because the radar shows enemies spotted by teammates, the bomb location if seen and the exact spot where a teammate died. You can also turn on Dynamic Radar, which zooms in and out based on available information. The circle around your position shows how far the sounds you are making can be heard, which helps you decide when to start walking on a flank.
6. Network and game settings
- Max Acceptable Matchmaking Ping: CS2 prioritises nearby servers, but lower this value if you have trouble with laggy servers.
- Display Network Connection Issues: set to automatic so the game tells you about instability.
- Max Acceptable Game Traffic Bandwidth: unrestricted.
- Buffering to smooth over packet loss: leave it at None unless you have packet loss, then try 1 or 2.
- Developer console: enable it.
- Damage Prediction: the guide recommends No for body shot effects, head shot effects and kill ragdolls while Valve is still working on this feature.
For deeper network tips that apply to any game, read how to optimise ping and network.
7. Binds and practice
Bind each type of utility, such as smokes and flashes, to separate keys, and consider binding jump to the scroll wheel. Because CS2 made jump throws consistent, the guide says you do not need a jump-throw bind. Set up binds before your first match, not during it. Then practise in short sessions on the maps you actually play; Valve’s current pool is in our active duty map pool guide, and the round-by-round money decisions are in CS2 economy explained.
Before you queue Premier
Setting up the game is half of competitive play, and the other half is knowing the mode. According to Wikipedia, CS2 has two main matchmaking modes. Competitive is a continuation of CS:GO’s system: you can pick any map and ranks are determined per map. Premier plays similarly but uses a seven-map pool with a voting and banning system and a numerical rating based on performance. Access to Premier requires the “Prime Status” upgrade. A standard bomb defusal match ends when a team wins 13 rounds, and eliminated players do not respawn until the next round. If you plan to take Premier seriously, it is worth rehearsing the pick and ban with your team, which the map pool guide linked above covers in detail.
A short checklist
- Native or familiar resolution, fullscreen, V-Sync off.
- Start near 830 eDPI and keep it fixed for a week.
- Use the default crosshair until you have a reason to change it.
- Fix audio, then radar, then network.
- Check Valve’s patch notes after each major update.
Where to go next
For the competitive scene itself, read our Counter-Strike 2 complete guide, and browse the gear and settings hub for more setup guides.
Frequently asked questions
What sensitivity do CS2 pros use?
ProSettings.net reports a median pro eDPI of 830, and the average pro moves the mouse about 47 cm for a 360-degree turn. The most-used DPI levels are 400 (66%), 800 (28%) and 1600 (5%). Sensitivity transfers 1:1 from CS:GO to CS2. Treat this as a starting point.
What resolution should I use in CS2?
The most-used pro resolution is 1280x960 (53%), then 1024x768 (15%) and 1920x1080 (13%), and most pros play stretched. ProSettings.net advises beginners to use their monitor's native resolution and to lower it only if frame rate is a problem.
Should I copy a pro's crosshair?
Not necessarily. The default crosshair is usable, and a Follow Recoil option acts as a built-in spray trainer. What matters is that your crosshair is visible on every background. Valve changed the crosshair settings in September 2026, so older crosshair codes may behave differently.
What refresh rate do I need?
ProSettings.net says you need at least 144 Hz to be even a little competitive and recommends at least 240 Hz if you are serious, noting that the competitive standard has moved towards 360 Hz with diminishing returns beyond that.
Do these settings count as official rules?
No. They come from one outlet's analysis of pro usage and its own recommendations, not from Valve. Tournament rules, such as allowed launch options, come from each organiser.
Sources
- CS2 best settings and options guide (data from pro players) · ProSettings.net
- Counter-Strike 2 · Wikipedia
Last reviewed:. Facts in this article are checked against the sources above and official pages. See our editorial policy, orreport a correction.





